Lcd Controller Board

3D Printer Kit MKS SBase V1.3 Controller Board + MKS TFT32 2.0 LCD Touch Screen

3D Printer Kit MKS SBase V1.3 Controller Board + MKS TFT32 2.0 LCD Touch Screen
3D Printer Kit MKS SBase V1.3 Controller Board + MKS TFT32 2.0 LCD Touch Screen
3D Printer Kit MKS SBase V1.3 Controller Board + MKS TFT32 2.0 LCD Touch Screen
3D Printer Kit MKS SBase V1.3 Controller Board + MKS TFT32 2.0 LCD Touch Screen
3D Printer Kit MKS SBase V1.3 Controller Board + MKS TFT32 2.0 LCD Touch Screen
3D Printer Kit MKS SBase V1.3 Controller Board + MKS TFT32 2.0 LCD Touch Screen
3D Printer Kit MKS SBase V1.3 Controller Board + MKS TFT32 2.0 LCD Touch Screen
3D Printer Kit MKS SBase V1.3 Controller Board + MKS TFT32 2.0 LCD Touch Screen

3D Printer Kit MKS SBase V1.3 Controller Board + MKS TFT32 2.0 LCD Touch Screen    3D Printer Kit MKS SBase V1.3 Controller Board + MKS TFT32 2.0 LCD Touch Screen

3D Printer Kit MKS SBase V1.3 Controller Board + MKS TFT32 2.0 LCD Touch Screen. MKS SBASE is a latest motherboard for 3D Printer , designed by Makserbase (MKS). It is based on ARM platform and uses 32bit 100M Cortex-MS MCU-LPC1768.

Using 32bit 100M Cortex-M3 MCU-LPC 1768, and improve its performance highly. Support highly modular open source firmware , easy for secondary development. Support network function, then proceed remote control via IE Explorer. Using DRV8825 stepper driver which supports 32-microstep and with excellent cooling. Currents of the stepper motor can be set directly, which can avoid the damage.

Using high quality FR-4 4 layers PCB and special design for cooling. Using professional power chip, support 12V-24V DC input. Good to work with MKS LCD12864 and MKS TFT touch screen. If you use the other 12864 we can't sure it can work.

Can't work with MKS MINI12864LCD, OLED12864 and LCD2004 display. Wiring is based on available information.

Bin" and "config from config file to SD card (SD smaller than 64Gb). Need to change config name. Txt according to the configuration.

Refer to MKS-SBASE PIN , make correction connection. Such as stepper motor , endstops. Plug the SD card to the board, after power on, it will automatic update. If connect computer with USB, need to install the driver (Refer to below specification). First, you should upload the zip file.

Then, plug the USB to computer. Then will turn up COM after install successfully. Txt to SD card, insert to the board and power on, it will automatic update. After successful updated, the file name will turn into. It is very easy to set the parameter. Txt on SD card, then modify the parameters and save.

Details on parameter, please refer to Configuration_Options. MKS TFT32 3.2'' LCD Display. MKS-TFT32 is a colorful touch screen LCD, it is suitable for many main board, such as MKS BASE, MKS GEN, MKS MINI, MKS SBASE, etc. Don't like MKS TFT28, MKS TFT32 do not support external power supply, can't work with Ramps1.4.

Connect to MKS BASE, MKS MINI. Step1: turn on MKS TFT32 at first time, then enter -> setting -> connection, select baud rate that the firmware use. Step2: enter -> setting ->model, choose printer type, only Delta and other two options Others: enter -> setting -> touch screen correction, improving accuracy. Copy the latest update firmware to SD card root directory, including: 1.

Please do not adjust the file name. Insert SD card, it will update automatically after restarts. MKS TFT can support MKS WIFI module. After MKS TFT works with MKS WIFI module, can use Printrun, Repetier-Host to proceed remote connect and control.

But it may make some functions unavailable. Configuration on single and double nozzle : change the value after the colon of "cfg_sprayer_counter" into the nozzle you need.

("1"is single nozzle; "2" is double nozzle). Heated bed configuration: change value after the colon of "cfg_custom_bed_flag" into custom requirements you need.

("1" is with heated bed; "0" is without heat bed). MKS TFT32 V2.0 touch screen. MKS TFT32 3.2'' LCD Display2.0. You can check your goods at any time, Rather than aimlessly waiting. Usually we declare the lower value.

Please make sure it's correct. We stand behind our products.

Return authorization must be provided to you before sending the item back. We will provide you with the details of how you should return products, including the address to which you should return products. Your receive the wrong item. We have our own factory, where a group of 3d printer experts and professional 3d printer researchers are devoted to produce more 3d printer products excellent in quality.

We have always been doing our best to provide the best service and reliable products for every customer. Low price, high quality, 100%compatible, excellent service and 100% satisfaction is our goal. Gative feedback, so that we can satisfactorily address your concerns.

Overview MKS SBASE is a latest motherboard for 3D Printer , designed by Makserbase (MKS). Package include: 1 x MKS TFT32 3.2'' LCD Display2.0 1 x MKS SBASE board1.3 2 x Cable 1 x USB cable Why choose us? The item "3D Printer Kit MKS SBase V1.3 Controller Board + MKS TFT32 2.0 LCD Touch Screen" is in sale since Wednesday, August 30, 2017. This item is in the category "Computers/Tablets & Networking\3D Printers & Supplies\Parts & Accessories".

The seller is "fdm3dp_9" and is located in China. This item can be shipped worldwide.

  • Brand: mks sbase
  • MPN: Does Not Apply
  • UPC: Does not apply

3D Printer Kit MKS SBase V1.3 Controller Board + MKS TFT32 2.0 LCD Touch Screen    3D Printer Kit MKS SBase V1.3 Controller Board + MKS TFT32 2.0 LCD Touch Screen