It is based on ARM platform and uses 32bit 100M Cortex-MS MCU-LPC1768. Using 32bit 100M Cortex-M3 MCU-LPC 1768, and improve its performance highly. Support highly modular open source firmware , easy for secondary development. Support network function, then proceed remote control via IE Explorer. Using DRV8825 stepper driver which supports 32-microstep and with excellent cooling.
Currents of the stepper motor can be set directly, which can avoid the damage. Using high quality FR-4 4 layers PCB and special design for cooling. Using professional power chip, support 12V-24V DC input. Good to work with MKS LCD12864 and MKS TFT touch screen.
If you use the other 12864 we cant sure it can work. Can't work with MKS MINI12864LCD, OLED12864 and LCD2004 display. Bin and config from config file to SD card (SD smaller than 64Gb). Need to change config name.For example: Change 1 into 2. Txt according to the configuration. Refer to MKS-SBASE PIN , make correction connection. Such as stepper motor , endstops.
Plug the SD card to the board, after power on, it will automatic update. If connect computer with USB, need to install the driver (Refer to below specification).Install the Driver First, you should upload the zip file. Then, plug the USB to computer. Then will turn up COM after install successfully. Download Firmware and Update Please upload firmware Copy configuration including firmware. Txt to SD card, insert to the board and power on, it will automatic update. After successful updated, the file name will turn into firmware. Main parameter setting MKS TFT32 3.2'' LCD Display - MKS-TFT32 is a colorful touch screen LCD, it is suitable for many main board, such as MKS BASE, MKS GEN, MKS MINI, MKS SBASE, etc. Don't like MKS TFT28, MKS TFT32 do not support external power supply, cant work with Ramps1.4. Connect to MKS BASE, MKS MINI Boot Setting Step1: turn on MKS TFT32 at first time, then enter > setting > connection, select baud rate that the firmware use. Step2: enter > setting >model, choose printer type, only Delta and other two options Others: enter > setting > touch screen correction, improving accuracy. Firmware Update Copy the latest update firmware to SD card root directory, including: 1. Please do not adjust the file name. Insert SD card, it will update automatically after restarts. MKS TFT can support MKS WIFI module. After MKS TFT works with MKS WIFI module, can use Printrun, Repetier-Host to proceed remote connect and control. But it may make some functions unavailable. Configuration on single and double nozzle : change the value after the colon of cfg_sprayer_counter into the nozzle you need.
(1is single nozzle; 2 is double nozzle) 2. Heated bed configuration: change value after the colon of cfg_custom_bed_flag into custom requirements you need.
(1 is with heated bed; 0 is without heat bed) Package Included: - 1 x MKS TFT32 3.2'' LCD Display - 1 x MKS SBASE board - 1 x Cable - 1 x USB cable. The item "3D Printer Kit MKS SBASE V1.3 Controller Board +3.2 inch LCD TouchScreen Display" is in sale since Wednesday, April 04, 2018. This item is in the category "Computer, Tablets & Netzwerk\Drucker, Scanner & Zubehör\Teile & Zubehör\Sonstige". The seller is "rcshop2011" and is located in Frankfurt. This item can be shipped worldwide.